Maretron Alternating Current AC Monitor - ACM100-01
Manufacturer Part #: ACM100-01
Couldn't load pickup availability
Maretron ACM100 Alternating Current (AC) Monitor – ACM100-01
The Maretron ACM100 AC Monitor (ACM100-01) brings powerful alternating current power monitoring to your boat’s NMEA 2000® network, giving you real-time insight into your vessel’s shore power, generator output, and onboard AC systems. Designed for seamless integration with Maretron displays and software like N2KView®, the ACM100 turns critical AC electrical metrics into network data that can be viewed anywhere on the vessel with compatible NMEA 2000® interfaces.
Whether you’re managing a generator, monitoring utility power, or tracking multiple AC busses on a large yacht, this monitor provides comprehensive electrical data — not just basic voltage and frequency — to help you diagnose power issues, optimize system performance, and protect your electronics from unexpected power anomalies.
Key Performance Features
-
Comprehensive Data Tracking: The ACM100 monitors all critical AC parameters, including Voltage, Current (Amps), Frequency (Hz), Real Power (Watts), and Reactive Power (VARs).
-
True RMS Measurement: It uses True RMS technology to provide accurate readings even on distorted waveforms, which is common when running off older generators or modified sine-wave inverters.
-
Total Energy Monitoring: The module calculates Energy Used (kWh) over time, allowing you to track exactly how much power your vessel is consuming during a trip or while docked.
-
Advanced Safety Diagnostics: By monitoring the relationship between voltage and current (Power Factor), it can help identify inefficient equipment or potential electrical issues before they cause a failure.
-
Plug-and-Play Network Integration: Data is broadcast over the NMEA 2000 bus, making it viewable on any compatible display like the Maretron DSM410 or a standard chartplotter.
Technical Specifications
-
Voltage Range: 0V to 264V AC (supports both 120V and 240V systems).
-
Current Capacity: Up to 150 Amps (when using the included current transformer).
-
Frequency: 45Hz to 65Hz.
-
Power Consumption: 50mA (1 LEN) from the NMEA 2000 bus.
-
Waterproof Rating: IP64 (Splash-resistant).
What's In The Box
The ACM100-01 kit includes the following components:
-
ACM100 Module: The main bridge unit with an NMEA 2000 Micro-C connector.
-
Current Transformer (CT): A high-accuracy ring sensor that clips around the AC hot wire to measure current without direct electrical contact.
-
Mounting Hardware: Stainless steel screws for secure installation.
-
User Manual: Comprehensive guide for wiring and NMEA 2000 configuration.
Benefits
-
Comprehensive AC power visibility — go beyond basic voltage and frequency with advanced power metrics
-
Improved diagnostics and safety — detect power anomalies early to protect sensitive electronics
-
Network-wide data access — share AC information across your NMEA 2000® network
-
Flexible monitoring — suitable for single-phase, split-phase, and three-phase systems when configured correctly
Typical Applications
-
Monitoring shore power quality and usage
-
Generator output monitoring
-
Tracking AC loads and energy consumption
-
Integrating AC system data into a unified vessel monitoring display
-
Power system dashboards on bridge displays and remote stations
Summary for the User
The ACM100 is a professional-grade solution for anyone who wants to eliminate the guesswork of AC power management. It is particularly valuable for protecting your boat from brownouts or overloaded circuits when multiple high-draw appliances (like AC units and water heaters) are running simultaneously.
Installation Tip: For the most accurate monitoring, the Current Transformer (CT) should be installed on the main AC feed immediately after the shore power inlet or generator breaker.
Maretron Alternating Current AC Monitor - ACM100-01 is backordered and will ship as soon as it is back in stock.
Reviews (0)
Reviews (0)
Accessories
Accessories
Maretron Micro Double-Ended Cordset - 6 Meter - CM-CG1-CF-06.0
Maretron Current Transducer with Cable for ACM100 - M000630
Maretron Micro Double-Ended Cordset - 2 Meter - CM-CG1-CF-02.0
Maertron Micro Double-Ended Cordset - 4 Meter - CM-CG1-CF-04.0
Maretron Current Transducer with Cable - 400 Amp for ACM100 - M000612
Manuals
Manuals
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
