Dual Pro RealPRO Series Battery Charger - 12A - 2-6A-Banks - 12V/24V - RS2

Reliable Power for 12V and 24V Systems

The RS2 features two independent 6-amp banks, providing a total output of 12 amps. This configuration is highly versatile:

• 24V Systems: Connect one bank to each of your two 12V trolling motor batteries in a series for a perfect 24V charge.

• Dual 12V Systems: Charge your starting battery and your house/trolling battery simultaneously, ensuring both are topped off and ready for a full day on the water.

DeltaVolt® Intuitive Charging Technology

The RealPRO series utilizes a sophisticated multi-stage charging profile that goes beyond simple "trickle" charging.

• Safe Charging: The system monitors the battery's state and adjusts current to prevent overcharging, which extends the overall life of your batteries.

• Deep Recovery: It is designed to "wake up" and recover batteries that have been deeply discharged (down to 2.0 volts), a common issue when electronics are left on accidentally.

Built for the Bilge

Marine chargers live in one of the harshest environments on earth. The RS2 is engineered to survive it:

• 100% Waterproof: The unit is fully potted and submersible, meaning it is impervious to salt spray, humidity, and direct water contact.

• Ignition Protected: Meets USCG and ABYC standards, ensuring it is safe for use in gasoline-powered boat engine compartments.

• Independent Banks: Because each bank is isolated, if one battery in your bank fails or has a weak cell, the charger will still properly charge the other battery.

Technical Specifications

In the Box: RS2 Kit

• (1) Dual Pro RealPRO RS2 2-Bank Charger

• (2) Pre-Wired Battery Leads: With ring terminals and inline fuses.

• (1) Integrated Power Cord: Standard 3-prong AC plug.

• (1) Set of Mounting Hardware

• Note: This charger is optimized for Flooded Lead Acid and AGM batteries. For Lithium (LiFePO4) applications, please verify your battery manufacturer's charging requirements.

Pro-Tip for Installation:

"To ensure the longevity of your RS2, mount it in a location with adequate ventilation, even though it is waterproof. Heat is the enemy of any electrical component. Additionally, always check the inline fuses on the charging leads if a bank appears 'dead'—vibration from running in rough water can sometimes loosen these connections."